YASKAWA JANCD-XCP0101C-1

1. Invensys Foxboro: I/A Series system, FBM (field input/output module) sequence control, trapezoidal logic control, accident recall processing, DAC, input/output signal processing, data communication and processing.
2. Invensys Triconex: Redundant fault-tolerant control system, the most modern fault-tolerant controller based on triple modular redundancy (TMR) structure.
3. Westinghouse (Westinghouse): OVATION system, WDPF system, MAX1000 system spare parts.
4. Rockwell Allen-Bradley: Reliance Ryan, SLC 500/1747/1746, MicroLogix/1761/1763/1762/1766/1764, CompactLogix/1769/1768, Logix 5000/1756/1789/1794/1760/1788, PLC-5/1771/1785, etc.
5. Schneider Modicon: Quantum 140 series processors, control cards, power modules, etc.
6. ABB: Industrial Robot Spare Parts DSQC Series (No. 2, No. 3, No. 4, No. S4C, No. S4C, IRC5), Bailey INFI 90, etc.
7. Siemens (SIEMENS):Siemens MOORE, Siemens Simatic C1, Siemens CNC system and so on.
8. Motorola (Motorola): MVME 162, MVME 167, MVME1772, MVME177 and other series.
9. XYCOM:I/O, VME board and processor.
10. GE FANUC (GE FANUC): modules, cards, drives and other spare parts.
11. Yaskawa (ochuan): servo controller, servo motor, servo driver.
12. Bosch Rexroth (BOSCH Rexroth): Indramat, I/O module, PLC controller, drive module and so on.
13. Woodward (Woodward): SPC valve position controller, PEAK150 digital controller.
14. Spare parts for industrial robot system
15. Advantage Brands: ABB Robots, FANUC Robots, YASKAWA Robots, KUKA Robots, Mitsubishi Robots, OTC Robots, Panasonic Robots, MOTOMAN Robots, etc.
16. 
17.  product deion:

　　1. this controller: 1 the source is under phase. 2. fuse disconnection detection. 3. overtemperature protection of heat sink of the controller. 4. abnormal output contact is provided for remote monitoring, and the contact capacity is 240vac / 5a.

　　2. the controller has the standard of ce international safety certification.

　　3. it has rst fuse open circuit indicator of each phase, and provides abnormal output contact, which can be used for system emergency control.

　　4. the cooling fan has temperature control. when the temperature of the heat sink is 55 degrees, it works and stops at 45 degrees, which can improve the service life of the fan by 2-3 times.

　　5. applied to load: ir lamp, quartz lamp, molybdenum disilicide, heater. use shoemaking machinery, plastic bottle blowing machinery, plastic extrusion machinery, vacuum evaporation machine, vacuum sputtering machine, heat treatment furnace, electric furnace, electric boiler, enamelled wire machinery, drawing machinery, textile machinery, constant temperature and humidity system.

　　6. overload protection: flash for 1 time.

　　source power under phase protection: flash for 2 times.

　　three phase unbalance protection: flicker for 3 times.

　　body over temperature protection: flicker for 4 times.

　　load disconnection protection: flash for 5 times.

　　7. set the maximum current limit to make users more diversified choices.

　　2、 function deion

　　replace the traditional electromagnetic switch and make up the temperature immediately to minimize the temperature difference and avoid sparks and arcs. set the maximum current limit to make users more diversified choices.

　　3、kuc711ae101 specification

　　1. main power supply voltage: ac 220v 380-480v ± 10%

　　2. auxiliary voltage: ac 220v ± 15% 50 / 60hz

　　3. rated current: 25a-750a

　　4. working frequency: 47-63hz

　　5. output mode: phase control output

　　6. phase input control signal: 4-20ma, 0-5v, 1-5v, 0-10v, 2-10v.

　　7. output voltage range: 0-100%

　　8. operating environment: - 10 ℃ - 50 ℃, humidity below 90% rh

　　9. insulation impedance: more than 20 m ω (between power supply and housing), more than 20 m ω (between input signal and housing)

　　10. withstand voltage strength: 2500vac / 1min between power supply and housing, 1000vac / 1min between power supply and input signal